Best IMPACT DRIVER Bits I've Ever Used - MAKITA XPS

Get A Makita XPS Starter Kit here * * * $19.99 * * * FREE SHIPPING amzn.to/2SdEyZT (amazon affiliate link)

Go Makita!! Big fan

The ph bits are really good, the fit is PERFECT haha

Best bit I ever used.

I prefer the milwaukee bit, I've had good luck with them, I've put thousands of screws in and haven't broke one yet

I'm the 500th comment

Finally makita is making something again that lasts.

Oh good old loctite I miss the old woodshop videos I miss 2016

You should probably consider changing over to permatex brand thread locker. Loctite brand owner is actively trying to shut down singletrack dirtbike trails and ohv trails. At least he is here in Colorado so a fellow dirt bike rider I thought you should know. God Bless you and your family Cody.

BLUE

in my experience milwaukee bits are the worst. they look cheap, they feel cheap, and they break all the time. I think dewalt and bosch make the best bits, I have never had problems with them. I don't use makita bits that often but from the bits I have used I can tell you that they do make some pretty nice drill bits.

CYAN! lol

Great tip! Loved the behind-the-scenes tutorial.

I like seeing the real wood. Heck with colors.

Back ground plaid

Have you tried Wera Impaktor? They are incredible

I'm being serious, I haven't been around this channel for a couple months why does Wrangler star look like a French pirate now?

Where can I buy those suspenders? Thanks 👍

Cool lighting tips at the end .

Well somebody has never used wera impact diamond bits lol

Can't say I've ever seen you use an impact in your videos, but if you haven't used them, you don't know what you're missing.... My grand father was big on screws and never had an impact, just drills, and for the longest time I didn't see the difference..... Until I actually used one that my friend had on hand to drive 3" screws into studs.... Boy, was that an eye opener for me. If you've never used impacts, you might want to look into them. I know you like DeWalt, and they're ok, but these days, I like Ridgid tools. But regardless of who makes it - dewalt, ridgid, milwakee, etc - impacts beat the snot out of drills all day every day.

I just ordered me a set of bits you recommended from the link you provided. Thank you because I'm in need of a good set.

ThankYou... might give them a try. If you say they are good and impressed you then they must work well.

Love the loctite in the frame!!!

I've seen the light.

The 60 impact xps piece kit is the better value. Don't get the 30 or 45 piece kit. It's only a $5 to $10 differences.

I love that you showed your recording setup!

Lol, You guys are way more important than anyone that could be calling here

Green is my color ! Well next to Fire Engineer Red 😊🚒🚒

Better than wiha and wera?

I’ll have to pick those up. Also, that is a lot of thinking for a video on bits. Thanks for putting your best into these videos!

Has IMPACT DRIVER in the title and grabs his drill...

Your description of frustration with the short bits sounds exactly like my experience with the freebies that are in the boxes of Spax screws.

😎👍👍

He just wants us to see his loctite

I been using a brand called xtorque and they last a long time, better then any other brand I've used

Xps bits are killer but like most bits 3 inch drywall screws murder the shit out of them

Those Makita XPS kits are nice! creative new room #Wranglerstar

I have been a fan of the SPAX screws. What brand do you prefer?

Have you tried GRK star drivers?

I had the same problem with Milwaukee's and Dewalts were not much better. Thanks for the advise I will give Makita's a try.

Eazypower is the best

Thank you for all your videos love them GO LOCTITE!! God Bless

Purple next

Not sure if its too late in the project to suggest this, but given how tight the room around the tanks is, it might be a fun challenge to build a hidden door to access them from the front. Have it be nearly seamless in the siding, maybe a roller catch latch to avoid any handles.

They have become my go-to bit for sure. I love how well they fit the screws and you can get them in 15 packs that come in a nice plastic container to hold them in that fit in a pocket super easy.

Makita has ben making the best bits for years... The makita golds were my go to until these came out and now i use these. You are absolutely correct. They are certainly amazing!

MAKITA everything is lovely i love Makita

I have had issues with both Milwaukee and Dewalt bits in this regard, happy I'm not alone.

I generally applaud your lighting, but THROW THAT GEL AWAY!

Aputure makes amazing lights been grabbing them when I need them over other light brands now @WranglerStar

Great video Cody @WranglerStar

I agree with the xps makita bits they are the best bits I have ever used as well @WranglerStar

Hey Cody do you have a denim colored background?

When I work on a houseboat I just jack up the downhill side

Hi Cody, enjoyed the video as always. I have to correct you on the un-level water comments though. As a captain for over 40 years I can assure you that apart from tumbling down a whitewater river or in rough seas in the ocean the surface of any relatively calm water is the most perfect level reference on earth. The problem is that the boat is impossible to keep level unless you are building it on land, in which case a level is very useful, particularly for all the upright components and interior decks. The horizontal components are not meant to be level anyway or they won’t shed water and are therefore almost always built with a bit of crown amidships to drain away water, at least on the exterior. And I would never go to sea without LocTite 😎 Keep up the great work

Loved the little bit of behind the scenes... Would be great to see more on that.

I have a torrid time with screw bits and I don't know what it is. I've a good driver and the same bits I see pros use, but my bits are always sticking in the screws and falling on the floor

Pink

Aye. I was very doubtful when I first bought Makita, but they have yet to disappoint.

Blue would be cool to see in the background

I want to see the color clear

That does look awesome

Cody's resume just says "Yes... I've done that too"

I've noticed you tend to use your cordless drill to fasten screws as opposed to your impact driver. Any reason?

Makita has 3 types the Gold =Hardest bits they will snap under max torque. The Black= softer ones will twist under max torque. The Silver = XPS are the best I tried to tell him that after the old test he did on bits .

ITS always Been 29.99 for the 45 pc set The STARTER Set is 19.99

omg i just realized im doing the exact same thing that the “i know im getting old when i like to watch this” memes are! I FEEL OLD

And here I was thinking a magician never revealed his tricks...

more filming nerd stuff please!!!

I just recently got the Dewalt MaxFit set and they are great. I'll have to check these out when its time.

Good to know . I have bought almost every brand bit and had problems .

You just need to commit and go full beard Cody! I think you’d pull it off very well! JMO.

The best ones are the packs of 50 for $4.99 at harbor freight. *sarcasm*

These quick videos on quality tools are very helpful.

*Project Farm has entered the chat*

I like Makita & Dewalt for my power tools. The Dewalt bits are also good, but are prone to round over / weat a little but more quickly than the Makita bits with heavy use. I agree, I don't use the magnetic bits, they always get lost or stuck.

You’re really going to love them if you put them in an actual impact driver. Millions of screws + impact driver = 7 years extra time saved

1/4 hex drive belongs in a driver. Not a drill. Change my mind.

I love the lighting and will be going to pick up the bits as well! Look forward to every video brother!!

Makita bits have always been the best.

EVERY time i watch any video and it ends with "thanks for watching.." my brain fills in with "keep your..'stick' on the ice"

The bokeh when you walked back to the wall was amazing.

If you think those are great, try the Norske tools bits. They have out lasted any brand ive ever used.

Loved the gold framed locktite!

You should grow out that stash and put curls in it it would look awesome on you

Hi! Me and my husband are very happy and excited for your new home. We moved in to our current house 2 years ago. It’s olds and strange house. It’s made of concrete, woods some bricks. Every thing we touch makes we wonder “what in the world you even do that”? We have done some basic stuff, like put in new windows, new concrete flooring, put new fire place in and some little things. We are struggling with planning what to do next. New roof(it’s terrible, thank God not leaking)? But we want the house bigger (in 3-4 years). Shop for tools? (Basically we are sleeping with them) but in to another hand , we need garage for car.. we are really struggling with this. May be you have some advice or some basic things what you have to do first (priorities). I’m sorry about my writing, we are from small country in Europe- The Baltic states- Latvia 🇱🇻. Thank you and God bless 🧚🏻‍♀️

Would you be willing to share links or even do a video about the studio lights you use? I am looking for a set up that is somewhat affordable and portable. The battery operated one would be a great option when shooting in an area without access to power.

Wow very impressive the tech side of mister west coast man. Well done sir.

That's good info thanks

Milwaukee are terrible bits. Makita is the most consist quality.

Don't let Mrs. W hear you say that we are more important than anybody else. You'll be sleeping in that shop! LOL! Makita makes great stuff. As a company I think they really strive to make the best products that can be made. Thanks for sharing.

Next color: brown (I'm referring to Technology Connections video) 😬

Have you heard of GRK before? They make amazing fasteners and their bits are amazing as well. You should check them out.

Cody definitely add PROJECT FARM to your USmuchs viewing list. He is pretty thorough in testing products, some test taking a year to complete. Thanks for sharing your experience with the new XPS bits.

Do you know the proxxon industrial bits and bitsets? These are really awesome too and i think proxxon is not well known in the american market,

Now cost $30 :/

Lol I thought it was some sort of color effect with software, nope low tech green piece of plastic. Very nice!

Disappointed the number plate on that Porsche wasn’t lock tite

I always upvote loctite 243